The replacement of your broken PVC pipe is much simpler as compared to that of the copper pipes. The inspection of these PVC pipes must be a regular practice as PVC pipes are more prone to constant cracks and breaks than the copper pipes.

Never judge the intensity of the problem associated with the PVC pipes with the size of the crack on it. This is because even a smaller crack can broaden very quickly on account of regular usage.

Start off the campaign by arranging all the necessary plumbing tools that you would need during the project. The tools such as pipe wrenches, screwdrivers, a roll of Teflon tape, a pair of channel lock pliers, a sealant compound etc. have to be incorporated in the regular scheme of things.

In order to carry out a safe operation, shut off the water supply from the main valve. Move to the project site and expose the area of the pipe which is under the scanner. Observe the crack and mark the area in such a way that six inches are added on either side of the crack. The resulting length of the pipe is removed with the help of a hacksaw.

Before the commencement of the project, place a large-sized container just below the pipe such that no water falls down on the floor. Also a towel or a piece of cloth is tied to the affected area to absorb any water leftover.

Start the cutting operation of the pipe with the help of a hacksaw. Cut one end first and drain it down to the container placed underneath. Now move on to the other end and cut it apart as well. Make sure that all the safety precautions are kept in tact during the usage of the hacksaw. Detach the pipe from the setup and take it down to a local plumbing/hardware store. The width and the quality of the new pipe must be at par with the old cut out pipe. Allow the salesperson to make any recommendation regarding the same and make your decision thereafter. Also buy the associated couplings that would allow the new PVC pipe to adjust to the fixture.

Dry off the edges of the pipe to connect the couplings and apply a bit of sealant on the fixture. Let the sealant bind well to the setup. Next insert the new length into the couplings and again apply a liberal amount of sealant on both the ends of the pipe.

Call a professional to handle the complications involved in the project.

Scott Rodgers is an acwisdomd author who has been providing great guidance on plumbing works all over the country. His amazing wisdom and expertise has, in fact, sparked significant rise in revenue for talented plumbers across the country, from Woodlake Plumbers (Need one? click here!) to Carlsbad Plumbers (Need one? click here!).